- Sheepshaver gui mac os#
- Sheepshaver gui install#
- Sheepshaver gui plus#
- Sheepshaver gui download#
- Sheepshaver gui windows#
Sheepshaver gui mac os#
Get BasiliskII, the Mac OS emulator from here: (get the one under "Always start with this download", this includes all of the support files)
Sheepshaver gui windows#
For this guide I'll be using Windows but you can do the same in MacOS and Linux.
Sheepshaver gui plus#
The versions of IE and Netscape that ship with MacOS can crash the emulator.We'll need a Mac OS emulator, the Magic Cap emulator, plus a bunch of support files. Note: Use Classilla or Netscape 7 in Mac OS 8.5 and above. Make sure to select a different tap device in the SheepShaver GUI from the device selected in the BasiliskII GUI. That way you can use Appletalk to communicate between both. You can network two instances of SheepShaver and Basilisk by installing a second tap device and adding it to the bridge you created before. In this case, however, you can also set the network settings yourself in the TCP/IP control panel. SheepShaver then gets its network settings from the DHCP server in your network. When set up with bridging, you can select the tap device in the Network tab of the SheepShaverGUI and start SheepShaver. SheepShaver then gets its network settings from the sharing functionality in Windows. When set up with sharing, you can select the tap device in the Network tab of the SheepShaverGUI and start SheepShaver. Running SheepShaver without the GUIīridge the tap device with your default network connection. If need be, at “Boot From” select “any”.Ĭlick “Start” to boot Mac OS from the hard disk.įigure 15: A fresh installation of Mac OS 9. Start the SheepShaverGUI (if you started from a CD image, remove the CD image from the list of mounted volumes). If you installed from a real CD, eject it. When Mac OS has finished installing, select “Shut Down” from the “Special” menu. Installation should just take a few minutes. You can add and remove stuff later on, if need be. You can pick and choose which components to install, but the default selection should be okay.
Sheepshaver gui install#
Just follow the directions on the screen, and make sure to install to the hard disk you initialized and named earlier. The actual installation of Mac OS is fairly straightforward, though the specifics differ based on which version you are installing. Figure 12 shows the desktop of an emulated Macintosh that has booted from a Mac OS 9 CD (or CD image).įigure 12: The Mac desktop before installation of Mac OS 9. Give the disk a name and click “Initialize”, then click “Continue”.įigure 11: Give your hard disk a name and initialize it. When the Mac boots, it will ask you to initialize the hard disk file you created. Mount drives: shows the host drives that will be available through the My Computer icon on the desktop.įigure 1: the Volumes tab, set to boot from a real CDįigure 2: the Volumes tab, set to boot from CD imageįigure 3: Creating a blank hard disk imageįigure 4: The Volumes tab with hard disk image created Enable “My Computer” icon on your Mac desktop (external file system): when checked, SheepShaver gives access to host drives. Try to automatically detect new removable media (enable polling): when checked, SheepShaver periodically checks for a newly inserted CD. You can drag the entries to a different position, if needed.ĭisable CD-ROM Driver: disables CD access. Note: If you are are listing an installation CD image here, it should be the first entry so that SheepShaver can boot from it. Note: The maximum size of hard disk images is 2 GBĪfter the hard file has been created, the GUI returns to the “Volumes” tab, and the hard file will be listed as added to your emulated Mac. Be patient… it can take a few minutes to create the file. Click “OK” to create the file (see figure 2). Set a size for the hard file (Mac OS requires at least 220 MB for a typical install) and give it a name. On the “Volumes” tab click “Create…” to create a hard disk image file onto which you will install Mac OS. If you had the GTK development kit installed (and no other programs are using it) you can remove it. If everything is okay, you can remove the old folder and its content. Next, run the GUI, point to the ROM and disks images and adjust the other GUI settings to match your old settings. You can also copy over your SheepShaver_prefs file so you don´t need to start configuring anew. If they are outside your old SheepShaver folder, leave them where they are. If you kept your ROM file and hard disk image(s) in the old SheepShaver folder, copy them into the new folder. The number of dll files may be a bit overwhelming, but the up-side is that it is no longer necessary to install the GTK development kit to run the GUI. Most of the dll (application extensions) files included in new versions are needed to run the GUI.
Sheepshaver gui download#
If you are upgrading from an old version of SheepShaver, you should download all files into a new folder and start fresh (but you can still use your old disk image and ROM).